Description:
Happymodel X12 Frsky 5in1 AIO Flight Controller - A Pilot's Dream Comes True
Forget about the next level, with the Happymodel X12 Frsky 5in1 AIO Flight Controller, you're taking a warp-speed journey to the Nth dimension of FPV flying! Why make do with basic, when you can have the world's first, sensational 5-in-1 AIO flight controller? That's right! With this little beauty, you've got an OPENVTX, 12A Brushless Blheli_S ESC and a Betaflight OSD, all in one slick package.
Can your current flight controller promise RX and VTX range that would leave superman feeling envious? We didn't think so! But the Happymodel X12 is not your average flight controller. It's an airborne magician in a silicon cloak, designed for brushless whoops, set to bewitch you with unbelievable RX and VTX range.
Key Product Highlights:
- Powerful Performance: This lightweight (5.1g), STM32F411CEU6 MCU backed marvel packs a punch with its 1-2S Lipo/LIHV battery support. It's essentially a Ferrari with wings!
- Sensational Sensor: Features a choice of MPU6000 or ICM20689 or BMI270 (SPI connection) sensor for a flawless, buttery smooth flight experience.
- Built-in Bonanza: A built-in 12A (each) Blheli_S 4in1 ESC, Betaflight OSD (SPI Control), 5.8G OpenVTX 0mw~400mw, ExpressLRS 2.4G, Frsky D8/D16, voltage meter sensor, and a current meter sensor. Talk about an all-you-can-fly buffet!
- Cutting-edge Compatibility: The onboard Frsky SPI D8/D16 receiver ensures sky-high compatibility, supporting D8 model channels for Non EU transmitters, with failsafe support.
So, FPV pilots, it's time to elevate your flying experience from "good enough" to "mind-blowingly awesome"! With the Happymodel X12 Frsky 5in1 AIO Flight Controller, the sky's not the limit - it's your playground. Let's paint the skies with the magic of next-gen flight control!
Specifications:
Brand Name: Happymodel
Item Name: X12 AIO 5-IN-1 Flight controller built-in 12A ESC and OPENVTX
Betaflight firmware target:
FRSKY Version:CRAZYBEEF4FR
VTX antenna: U.FL
Weight: 5.1g
Support 1-2S Lipo/LIHV battery
Size: 30mm*30mm*8mm
| Flight controller |
X12 Frsky V2.1 flight controller built-in FRSKY 2.4G receiver Target: CRAZYBEEF4FR
MCU:STM32F411CEU6 (100MHZ, 512K FLASH)
Sensor: ICM20689 or BMI270 or ICM42688P(SPI connection)
Mount hole size: 25.5mm*25.5mm
Power supply: 1-2S battery input (DC 2.9V-8.7V)
Built-in 12A(each) Blheli_S 4in1 ESC
Built-in Betaflight OSD(SPI Control)
Built-in 5.8G OpenVTX 0mw~400mw
Built-in ExpressLRS 2.4G,Frsky D8/D16, Flysky AFHDS-2A
Built-in voltage meter sensor , voltage meter scale 110Built-in current meter sensor , current meter scale 470 |
| Onboard 4in1 ESC |
Power supply: 1-2S LiPo/LiPo HV
Current: 12A continuous peak 15A (3 seconds)
Support BLHeliSuite programmable
Factory firmware: Z_H_30_REV16_7.HEX
Default protocol: DSHOT300
Support Bluejay firmware
When use Blujay firmware with 48khz, should set startup power to 1100/1200 |
| |
|
| Onboard Frsky SPI D8/D16 receiver Version |
SPI BUS receiver
CC2500 RF
Compatible Non EU transmitter D8 model Channels: 8ch
No ground interference ( Transmitter and receiver 1 m from the ground): 200meterFailsafe support
Support Frsky D8/ D16 , Redpine , SFHSS |
| Onboard Flysky SPI AFHDS-2A receiver Version |
SPI BUS receiver
Protocol: AFHDS-2A
Channels: 14ch(AFHDS-2A)
No ground interference ( Transmitter and receiver 1 m from the ground): 100~200m
Failsafe support |
| Onboard 5.8g OPENVTX |
Firmware version: OPENVTX
Smartaudio v2.1
PIT Mode support
RCE Mode support
Channels:48ch
Transmitting Power: 0/RCE/25mw/100mw/400mw
Power supply: DC 5V
Current (5v): <650ma (400mw)
Antenna connector: U.FL |
Specification
- Brand Name: Happymodel
- Item Name: X12 AIO 5-IN-1 Flight controller built-in 12A ESC and OPENVTX
- Betaflight firmware target:
- ELRS Version: CRAZYBEEF4SX1280
- VTX antenna: U.FL
- Weight: 5.1g
- Support 1-2S Lipo/LIHV battery
- Size: 30mm*30mm*8mm
| Flight controller |
X12 ELRS V2.0 flight controller built-in ELRS 2.4G receiver Target: CRAZYBEEF4SX1280
MCU:STM32F411CEU6 (100MHZ, 512K FLASH)
Sensor: MPU6000 or ICM20689 or BMI270(SPI connection)
Mount hole size: 25.5mm*25.5mm
Power supply: 1-2S battery input (DC 2.9V-8.7V)
Built-in 12A(each) Blheli_S 4in1 ESC
Built-in Betaflight OSD(SPI Control)
Built-in 5.8G OpenVTX 0mw~400mw
Built-in ExpressLRS 2.4G,Frsky D8/D16
Built-in voltage meter sensor , voltage meter scale 110Built-in current meter sensor , current meter scale 470 |
| Onboard 4in1 ESC |
Power supply: 1-2S LiPo/LiPo HV
Current: 12A continuous peak 15A (3 seconds)
Support BLHeliSuite programmable
Factory firmware: Z_H_30_REV16_7.HEX
Default protocol: DSHOT300
Support Bluejay firmware
When use Blujay firmware with 48khz, should set startup power to 1100/1200 |
| Onboard SPI ExpressLRS 2.4GHz Receiver |
Packet Rate option: 50Hz/150Hz/250Hz/500Hz
ExpressLRS Firmware version: V2.0
RF Frequency: 2.4GHz
Antenna : SMD antenna
Telemetry output Power: <12dBm
Receiver protocol: SPI ExpressLRS
Compatible with ExpressLRS V2.0 TX Module
Couldn't flash separately ExpressLRS firmware
|
| Onboard Frsky SPI D8/D16 receiver Version |
SPI BUS receiver
CC2500 RF
Compatible Non EU transmitter D8 model Channels: 8ch
No ground interference ( Transmitter and receiver 1 m from the ground): 200meterFailsafe support
Support Frsky D8/ D16 , Redpine , SFHSS |
| Onboard 5.8g OPENVTX |
Firmware version: OPENVTX
Smartaudio v2.1
PIT Mode support
RCE Mode support
Channels:48ch
Transmitting Power: 0/RCE/25mw/100mw/400mw
Power supply: DC 5V
Current (5v): <650ma (400mw)
Antenna connector: U.FL |
Included
- 1 x Happymodel X12 Frsky AIO Flight Controller Board
Product Tags: FPV flight controller, Happymodel X12, Frsky 5in1 AIO Flight Controller, Frsky D8/D16 compatible, built-in Betaflight OSD, onboard Frsky receiver, built-in Blheli_S ESC, built-in OpenVTX.
(0 ) Reviews:
No reviews yet. Be the first to review!