Description:

BorgF7Mini Stack with 60A 4in1 ESC (2020)

Introducing the BorgF7 Mini Stack - a compact 2020mm FC mated with a 60A 4in1 ESC, built to light up your 5 freestyle or crossclass build. Untangle less wires, rip harder, and maybe pry open another wallet.

Why You Want It

This board bundles an F7 flight controller (fast loop speeds) with a beefy 60A ESC in one sleek package. No solderspaghetti, fewer weight penalties, and clean routing. We confess: we're selling these to fuel more latenight tunesessions.

Specifications

• FC MCU: STM32F722 (highspeed PID loops, low latency)
• Gyro: ICM20689 or MPU6000 (your flight tastes decide)
• ESC: 4in1 60A BLHeli_32 (supports DSHOT1200, TEC, regen)
• Voltage Input: 4-6S LiPo (compatible with 5 and 6 freestyle setups)
• FC Stack Height: 5mm standoffs included (flips flatstack or sandwich)
• Blackbox: 8MB onboard (crash now, analyse later)
• Weight: ~22g total (light enough not to bloat your AUW)

What's in the Box*

• 1 x Borg F7 Mini Flight Controller
• 1 x Borg 60 Mini ESC
• 1 x Cable set
• 5 x silicon grommets

Compatibility

Perfect for 5-6 freestyle and racing quads. Belongs in any 2020 frame wanting clean wiring and big powerworks with any F7compatible Betaflight or Butterflight setup.

Features and Highlights

• Highrate STM32F722 FC Built for punchy response and smooth snaps.
• 60A BLHeli_32 ESC Power that laughs at bigger props and aggressive throttles.
• Clean 2020 footprint No spaghetti, just sleek carbonstacking joy.

Product Notes

FC uses JSTGH power, ensure correct orientation. ESC comes BLHeli_32 readyflash latest firmware for regen and telemetry. Softmount recommended for gyro clarity.

Disclaimer

Ribbon cable and battery leads might varybut the stack delivers identical power and performance.

StillHere?

Reading specs this deep means you're the kind of pilot who tunes till the sun rises. If "2020 F7 stack with 60A ESC for 5 freestyle" is your next build requirement, congratsyou've got it. Stick it in your cart and rip harder.

FC Specifications

Input voltage: 4-8S; Support LIHV battery

MCU: STM32F722RET6

Gyro: ICM42688

Barometer: SPA06-003

OSD Chip: AT7456ELGA

Flash: 32MB (Blackbox flash)

UARTS: 6

Motor outputs: 4

I2C serial: Not supported

VTX protocol: support DJI MSP/Smartaudio/IRCTramp/HDZero

LED controller: Yes

Beeper pad: Yes

Betaflight Firmware target: IFLIGHT_BLITZ_F722

INAV Firmware target: IFLIGHT_BLITZ_F722

Mount pattern: 20*204

Dimensions: 27*30.6mm1

Weight: 6.8g1

BEC: 5V 2.5A, 12V 2A (12V with VTX switch)

Wiring Suggestion

UART 1 for VTX HD / Analog

UART 2 for Receiver

UART 3 for GPS or other sensors that require a serial port

UART 4 for GPS

UART 5 for GPS or other sensors that require a serial port

UART 6 for ESC Telemet

ESC Specifications

Product Name: Borg Mini 60 ESC

Input Voltage: 2-6S; Support LIHV battery

Max. Continuous Current: 60A

Max. Burst Current: 65A (10s)

MCU: STM32G071N

Driver: FD6288

Firmware: BL32 (32bit ESC)

Target: IFLIGHT_BLITZ_G3 32.9

Current Sensor: Yes

BEC: N/A

Telemetry: Supported

Bidirectional DSHOT: Supported

Dimensions: 42*35mm1

Mounting Holes: 20 x20 mm/4mm

Weight: 9.8g1

Protocol: Supports DShot150/300/600MultiShotOneShot etc.