Description:
Attention all lithium polymer battery pack owners! Are you tired of worrying about overcharging, over-voltage, high temperature, and other potential dangers during charging? Well, don't worry, the Gens Ace Charging Safeguard 6S Charger Protector has got you covered!
This tiny but mighty device is designed to keep your lithium polymer battery pack safe while charging. With a net weight of 88g and dimensions of 88mm Length x 65mm Width x 20mm Height, it's easy to use and store. And, with a max input current of 30A and output current of 30A, this Charging Safeguard is ready for even the most demanding charging sessions.
3 Key Product Highlights:
- Auto shut-off protection features, including over-voltage, over-current, high temperature, and abnormal detection.
- Battery checking feature to detect low voltage and prevent potential hazards.
- LED Indicator to show the working status of the Charging Safeguard, so you always know what's going on.
So, sit back, relax and let the Gens Ace Charging Safeguard handle the rest. And remember, don't leave this product unattended while charging, but other than that, it's a no-brainer!
Features
1.Over-voltage Protection:
When charging, if the Charging Safeguard detects that the voltage of a single cell is 4.3V or over and the voltage lasts more than 2 seconds, it will automatically stop charging and the Yellow LED will activate. Please disconnect and reconnect to resume use of the Charging Safeguard.
2.Over-current Protection:
When charging, if the Charging Safeguard detects that the charging current is over 30A and the current lasts more than 1 second, it will automatically stop charging and Yellow LED will activate. Please disconnect and reconnect to resume use of the Charging Safeguard.
3.High Temperature Protection:
When charging, if the internal temperature of the Charging Safeguard is over 70, it will automatically stop charging and the yellow LED will activate. To resume charging, please cool down the Charging Safeguard and battery if required. Please disconnect and reconnect the battery to resume charging.
4.Battery Checking:
When charging, if the voltage of any single cell is lower than 2.5V. The Red LED will start blinking and the charging will be stopped. The voltage of the battery is dangerously low. DO NOT use this battery pack under any circumstances. Safely and properly dispose of this damaged battery pack immediately.
5.Abnormal Detection:
If the Safeguard detects anything abnormal, the Red LED will activate which means the Safeguard is malfunctioning. Please contact [email protected] for assistance.
6.Auto Sleep Mode:
When connecting the Charging Safeguard to the battery, the indicator LED will deactivate and the Safeguard will automatically start Sleep Mode if charging does not begin within 30 minutes. Please disconnect and reconnect the battery to exit Sleep Mode.
7.LED Indicator:
If the Green LED is active, the Charging Safeguard works properly.
If the Yellow LED is active, the protection feature is activated.
If the Red LED is active, the Charging Safeguard is malfunctioning
If the Red Led is blinking, the battery pack is defective and unable to be charged.
ATTENTION:
Don't reverse connector polarity.
Don't short any connectors together.
Don't leave this product unattended while charging. Stop using the Safeguard if you find anything abnormal.
Don't charge any battery that is not in the correct voltage range.
USE with Lithium polymer batteries ONLY. DO NOT use any other battery chemistry with Charging Safeguard.
Keep Charging Safeguard away from dust, humidity, rain and heat sources. Avoid direct sunlight and strong vibrations.
Included
(0 ) Reviews:
No reviews yet. Be the first to review!