Description:
Introducing iFlights first ultra-light Long Range 5 inch drone for every terrain and beyond. Using the Beast F7 AIO on board coupled with our XING 2005 motors. If you loved the Chimera4, buit found the size slightly limiting in strong wind, then this one is for you. You can get flight times over 25min using Li-On 4S 3000mAh packs.
GPS Rescue ready for easy recovery in case of signal loss, or even if you've been surfing those mountains and suddenly can't find the way back home.. Betaflight OSD pre-setup GPS elements will show you the way! Custom iFlight 150mm LR antenna for best signal coverage even at long distances.
CaddX Vista with CaddX Nebula Pro camera.
Outstanding digital FPV experience in 720p directly on your goggles. Custom iFlight 150mm LR antenna for best signal coverage even at long distances.
Expected flight times (cruising, no freestyle, average speed):
- Recommended battery: 4S 1300mAh and above!
- Without GoPro: 11-13min // 4S 1300mAh, 14-15min // 4S 3000mAh Lion pack, 22-24min
- With naked GoPro: 4S 1300mAh, 12-13min // 4S 3000mAh Lion pack, 20-22min
- With full GoPro Hero8: 4S 1300mAh, 4-6min
- ULTIMATE RANGE with full GoPro: 4S 4000mAh, 13-16min (iFlight FULLSEND INR21700, iFlight 5V BEC instead of GoPro battery)
CAUTION: Flying LIPOs like 850mAh and below might exceed your battery's max power output on high throttle, might overheat the battery cells and shorten the battery lifespan drastically. Please fly with care!
CAUTION: Li-ion battery packs offer longer flight times (more capacity with less battery weight) but don't have as much current output as LiPo batteries and tend to get hot if overloaded! Please read the specs and stay within limits!
Features
- Mini long-range quad
- XING 2005 2550KV Ultralight motors (Prop mount pattern currently only compatible with iFlight Nazgul Props)
- DC (DeadCat geometry) bottom plate, No props in view
- GPS pre-installed for more safety at distance
- Beast F7 45A AIO board
- Naked GoPro and Full GoPro ready (included TPU base mounts)
- 360 TPU protection, Vista cam protection, and antenna mounts
- Caddx Vista Digital HD System / Caddx Nebula Pro Digital HD System
Pre Tuned and Setup
- Pre tuned by Iflight, a general PID- and Filter tuning was applied for a great flight experience!
- To restore lost tunes or updates, please check out Iflight CLI FIrmware settings here
- Angle-Mode (self balancing level mode) is enabled by default to make sure your first flight doesn't end in a mess!
- GPS Rescue is OFF by default to prevent from unwanted or unexpected drone behaviour as this is still an experimental feature. Please see our article on how to enable GPS rescue mode
Specifications
Frame: Chimera5
- Wheelbase: 219mm
- Main body dimension: 135*173mm
- Bottom to top distance: 28mm
- Arm thickness: 4mm
- Bottom plate thickness: 2mm
- Top plate thickness: 2mm
- Middle Plate thickness: 2.5mm
- TPU Camera plate
- FC: 25.5*25.5mm/20*20mm
- FPV Cam: 19mm Micro / 20mm
Beast F7 AIO Flight Controller
FC
- MCU: BGA-STM32F745
- Gyro: MPU6000
- Blackbox: 8Mb Onboard Flash
- BEC output: 5V 2.5A
- Barometer: BMP280
- Connector: Micro-USB
- OSD: AT7456E
- FC FirmwareIFLIGHT_F745_AIO
- ESC: 45A 2-6S BlheliS G-H-30
- Mounting pattern: 25.5*25.5mm 3mm
- Dimensions: 32.5*32.5mm
- Weight: 8.5g
Includes
Pre-built and indoor tested Quadcopter
- 1x Chimera5 HD Quadcopter Drone
- 1x GoPro TPU bottom stand incl. lock screw - designed to be used with iflight adjustable gopro mounts (sold separately)
- 1x Albatross LHCP RP-SMA 5.8g 150mm antenna
- 2x Nazgul 5030 propellers (colour may vary)
(0 ) Reviews:
No reviews yet. Be the first to review!