Description:
Tired of drones that promise the moon but deliver a paper airplane experience? Meet the Happymodel Mobula6 ECO 2024, the featherweight champion of the micro HD FPV drone world, tipping the scales at a mere 23.16 grams (sans battery). This isn't just a drone; it's your covert operative in the skies, sneaking through tight spaces with the agility of a cat (if cats could fly and were tech-savvy).
Please note that you will need to contact HDzero directly if you have any issues with the VTX, we can only offer support for the drone itself (FC/Motors)
Compact Yet Mighty:
With a 65mm wheelbase, this drone is like that small friend who surprisingly wins the arm-wrestling contest. Don't let its size fool you; it's equipped to handle 1S Lipo or LIHV batteries, featuring a GNB A30 battery plug that's more secure than your online passwords.
Engineering Marvel:
Sporting Happymodel's lightest brushless SE0702 motors at a featherlight 1.49 grams each, this drone is so smooth and powerful, it might just make your morning coffee obsolete. And with an HDZERO ECO VTX and Camera, you'll be capturing crisp, interference-free aerial footage that could make a hawk jealous.
Tech Specs That Impress:
From its SuperX HD ELRS AIO with onboard blackbox logging to its nimble propellers and sophisticated flight controller, this drone is packed with features that make tech enthusiasts weep with joy. It's like the Swiss Army knife of drones - but instead of opening bottles, it's capturing breathtaking HD footage.
| Motor |
Mode: SE0702 KV28000
Configu-ration:9N12P
Stator Diamter:7mm
Stator Length:2mm
Shaft Diameter:1mm
Motor Dimension(Dia.*Len):9.5mm*14mm
Weight(g):1.49g
No.of Cells(Lipo):1S only |
| Propellers |
Materials: PC
Inch: 31mm
Pitch: 0.8 in
Weight: 0.21g
Mount hole diameter: 1mm |
| Flight controller
SuperX HD ELRS
|
Betaflight 4.4.2 firmware ready
Firmware target: CRAZYBEEF4DX
MCU:STM32F411CEU6 (100MHz, 512K FLASH)
Sensor: BMI270 or ICM42688P (SPI connection)
Power supply: 1-2S Lipo Lihv battery input (DC 2.8V~8.7V), only support 1s input for this drone
Built-in 12A(each) Blheli_S 4in1 ESC Dshot300 read
Built-in UART elrs receiver , elrs v3.0 ready, support WIFI and pass-through firmware update
Bluejay ESC Firmware ready
Built-in 5V 1A BEC
Built-in voltage detection
No betaflight analog osd chip |
| Onboard 4in1 ESC |
Power supply: 1-2S LiPo/LiPo HV
Current: 12A continuous peak 15A (3 seconds)
Support ESC-Configurator and BLHELI_S Suite configurator
Factory firmware: Z-H-30 - Bluejay, 0.19, 48kHz
Default protocol: DSHOT300 |
| Onboard Serial ExpressLRS 2.4GHz Receiver |
RF Frequency: 2.4GHz
Antenna: enameled copper wire 31mm length
Telemetry output Power: <12dBm
Receiver protocol: CRSF
Default firmware version: ExpressLRS V3.0.1
The same hardware with Happymodel EP1 receiver
Could update firmware via ExpressLRS configurator or WIFI or Betaflight pass-through |
| HDZERO ECO VTX |
Composite HD Video interface
1S-3S Input
25mW/200mW RF output
25.525.2 M2 soft mounting
Antenna Retention
32.432.5mm (29x29mm inner)
4.5grames/4mm Thickness (w/o shielding) |
| HDZERO ECO Camera |
Image Sensor 1/3"
Resolution: 720@60fps 4:3
LENS: FOV D:150 H:120 V:98
Shutter: Rolling Shutter
Net Weight: 1.6g (With Cable)
Dimensions: L14mm*W14mm*H13mm |
What's in the Box:
- Happymodel Mobula6 ECO 2024 1S 65mm Whoop (ELRS)
- Accessories
Fly Smarter, Not Harder:
So, if you're ready to dominate the skies with precision, agility, and a touch of technological wizardry, the Happymodel Mobula6 ECO 2024 is your ticket to the big leagues. Say goodbye to the mundane and hello to aerial excellence with this mini but mighty powerhouse.
(0 ) Reviews:
No reviews yet. Be the first to review!