Description:
NOTE: For 1404 (or similar-sized) motors or 4S builds, it is essential to solder a low-ESR capacitor across the AIO battery pads to avoid damage from voltage spikes. Always test your boards with a smoke-stopper or similar method prior to their first test flight.
Introducing the All-in-One (AIO) Masterpiece: The TuneRC Poly F405 2S-4S!
Are you tired of juggling multiple components for your FPV micro community builds? Say hello to our versatile, high-performance Poly F405 2S-4S AIO board, perfect for everything from zippy micros to long-range quads and inventive X6/X8 configurations. We've crammed in more features than you can shake a stick at, making it the ultimate partner for your next build.
Key Product Highlights:
- Unleash your creativity with 5 UARTs, 8 motor outputs, and built-in blackbox and current meter.
- High-performance F405 chip and top-quality 20A mosfets ensure your quad stays powerful and reliable.
- Pre-flashed with Bluejay firmware for bidirectional Dshot and RPM filtering, taking your flight experience to new heights.
Attention Micro community pilots, we've got the Swiss Army Knife of AIO boards!
The Poly F405 AIO board boasts 5 UARTs, 8 motor outputs, and built-in blackbox and current meter. Perfect for any build you can dream up!
Imagine the freedom to experiment with your next build without limitations! This AIO board comes packed with high-quality components like the powerful F405 chip, 20A mosfets, and excellent heat dissipation design, ensuring your quad stays in top form.
Don't miss out on the ultimate AIO experience! Click "Add to Cart" and make the Poly F405 2S-4S AIO the heart of your next project.
Remember: versatility makes possibility for different builds! With our Poly F405 2S-4S AIO board, you'll never feel restricted in your creations again. Say goodbye to "just another quad" and hello to the limitless potential of your imagination. So, what are you waiting for? Grab your Poly F405 AIO board today and take your FPV micro community game to the next level!
Flashing Firmware
Please flash firmware as steps below. Go to "Firmware Flasher" tab in Betaflight> Select flight controller " TUNERCF405 " > Enable "Full chip erase" > Click "Load Firmware (Online)"> Click "Flash Firmware"
Meet the Jack of All Builds: Poly F405 AIO Board
Embrace the limitless possibilities of your wildest FPV dreams! The Poly F405 AIO board is armed to the teeth with 5 UARTs, 8 motor outputs, and a built-in blackbox and current meter. Buzzers, GPS modules, barometers - you name it, we've got a slot for it! And hey, x8 quad fans, we're looking at you . Don't worry, advanced users, we didn't forget you - we've got all the Betaflight tuning essentials on board.
High-Flyin' Performance
Our F405 MCU, FD6288 chip, and top-notch 20A mosfets work together in perfect harmony, just like a well-conducted FPV symphony. With 168MHz processing power and 1MB flash memory, you can unleash RPM filtering, dynamic idle, and other Betaflight features without breaking a sweat. Hardcore freestyle flying? No problemo! Our excellent heat dissipation design keeps things cool under pressure.
Pre-flashed with Bluejay
This AIO board comes pre-flashed with the open-source Bluejay ESC firmware, known for its bidirectional Dshot and RPM filtering - perfect for boosting your flight performance. Hats off to the hardworking Bluejay devs! For more info, just head to Github or join their Discord for a good ol' chat.
F405: A Balanced Beast
When it comes to frequency, memory, and IO, the F405 is like Goldilocks' porridge - just right! Outshining F405 and F722 on flash memory, it's the perfect fit for rapidly developing Betaflight. Say goodbye to the cramped 512K flash memory of F411 and F722. The F405's larger flash memory is a breath of fresh air for devs and pilots alike.
Note: For the uninitiated, "IO" is short for input and output. Now, you're in the know!
Specifications
- FC MCU: STM32F405RGT6( Cortex-M4 168Mhz )
- Built-in OSD: AT7456E
- Built-in IMU: BMI270
- Built-in 4MB Blackbox
- Built-in Current Meter
- ESC MCU: EFM8BB21 ( 8bit 50MHz )
- UART: UART1 ( for VTX by default ), UART2, UART3, UART4( for the receiver by default, supports SBUS ), UART5
- Other interfaces: IIC ( IIC2 ) , LED_Strip, Buzzer
- The through holes for power lead: big enough to fit 16AWG wire
- 8 Motor Outputs ( The onboard esc have been used for 4 motor outputs. You can add 4 external esc if you want to use the other 4 motor outputs )
- Input Voltage: 6.50-20.0V( 2S-4S LIPO/LIHV )
- Power Output: 5V 2A
- Continuous Current: 20A
- Peak Current: 28A
- FC Target: TUNERCF405
- ESC Firmware: Bluejay P-H-25
- Size: 33mm x 33mm
- Mounting Holes Pattern: 25.5 x 25.5mm Room for M3.5 grommets to make M2 mount
- Weight: 5.8g
Included
- 1 x TUNERC Poly F405 2S-4S AIO Flight Controller - 25.5x25.5
(0 ) Reviews:
No reviews yet. Be the first to review!