ToolkitRC M7AC Multi Function 100W AC / 300w DC Smart Balance Charger

Description:

Introducing the ToolkitRC M7AC Multi-Function AC Smart Charger, the ultimate power tool for all your charging needs! With dual AC/DC input and XT30/XT60 output, this charger is like the swiss army knife of chargers. Here are three reasons why the Toolkit M7 is a must-have in your toolbox:

1. Versatile Charging Options : With support for 2-6S batteries and compatibility with a variety of battery types, including Lipo, LiHV, LiFe, Lion, LTO, NiMh, and Pb, the ToolkitRC M7AC Multi-Function AC Smart Charger ensures your battery is always charged and ready to go, no matter the device.
2. All-In-One Tool : Not only is the Toolkit M7 a charger, it's also a power supply, multimeter, signal source, drone charger, and signal tester. This little gadget can do it all, making it the perfect addition to your workbench.
3. Quick and Efficient : The Toolkit M7 boasts a power of 300W, with a balance current of 800mA @ 4.2V. It's also equipped with a fast overcurrent response time of less than 5ms, so you can be sure your devices are always charged safely and efficiently.

So, whether you're a drone enthusiast or a tech-savvy hobbyist, the ToolkitRC M7AC Multi-Function AC Smart Charger is a must-have in your toolkit. Get yours today and experience the ultimate in charging versatility and efficiency!

Please note that for Toolkit RC chargers, a voltage calibration may be required before use or after a firmware update. This calibration ensures accurate readings and optimal performance. For detailed instructions on how to perform a voltage calibration, please refer to the manual included with your charger. You can also find more information on this process at the following link: https://help.unmannedtech.co.uk/portal/en-gb/kb/articles/how-to-calibrate-toolkit-rc-voltage.

Specifications

CHARGER

• Discharge Power: 300W @MAX 15A Recycle mode / 15W@3A Normal mode
• Input Voltage: AC 100-240V MAX 100W 1.5A / DC 7.0-28.0V @MAX 20A
• Battery Type: Lipo LiHV LiFe Lion LTO@1-6S / NiMh @1-16S Pb @1-10S
• Charging Power: 300W @MAX 15A
• Balance Current: 800mA @ 4.2V
• USBA: [email protected] or Upgrade

GENERAL

• LCD: IPS 2.4 inch LCD 320*240 resolution
• Packing Size: 144x125x43mm
• Product Size: 112x73x38mm
• Packaging Weight: 380g
• TF Card: 128MB-16GB
• Product Weight: 245g

MEASURE

• Internal Resistance: 0.1 mR-99mR @ 1-6S
• SBUS: 880-2200us * 16CH @ 20-100Hz
• PPM: 880-2200us * 8CH @ 20-50Hz
• PWM: 880-2200us @ 20-400Hz
• Voltage: 1.0-5.0V @ 1-6S
• ESC: 300W @ 15A

OUTPUT

• Power Supply: 1.0-28.0V @0.5-15A mode: CC CV
• SBUS: 880-2200us * 16CH @ 20-100Hz
• PPM: 880-2200us * 8CH @ 20-50Hz
• PWM: 500-2500us @ 20-1000Hz
• Overcurrent Response: <5ms

Includes

• 1x ToolkitRC M7 100W AC/300W DC 15A 2-6S Multi-Function AC Smart Balance Charger

It is important to handle the ToolkitRC M7AC Multi-Function AC Smart Charger with care, as charging batteries can be dangerous if not done properly. Always ensure that you are using the correct charging cable and follow the recommended charging times and procedures. Never leave your batteries charging unattended and always keep a close eye on them while they are charging. We strongly recommend charging your batteries inside a protective charging bag to prevent any mishaps. Remember, safety first!