TKC 87 Key DIY Hot Swap Mechanical Keyboard

Description:

Features

• Bluetooth up to 3 devices/Wired Mode
• Hot Swappable switches and keycaps (Not Included)
• Customisable lighting effects
• Ability to record macros
• Win Key lock/unlock

Specifications

Instructions:

FN+Tab: cable/Wireless mode switch

• When keyboard is connected with the cable, Press the FN+Tab switch to wired mode, Press FN+Tab again, switch to Wireless Bluetooth mode.
• The backlight will flash two times to confirm the switch.

FN+P: To enter pairing mode

• Turn On the switches from the back of the keyboard
• First press FN+Tab to switch to Wireless Bluetooth mode
• Then press FN+P for 3 seconds to enter the pairing state
  • (P key will continuously flash until paired successfully)

FN+Q/W/E: Bluetooth device Switch

• You can connect and switch between 3 devices in Bluetooth mode.
• To switch connected device, press FN + Q/W/E
  • The light will flash twice to confirm pairing

You will need to charge the keyboard via cable before use. Full charge will take around 3 hours.

When in Bluetooth mode, the keyboard backlight will power off after 1 minute and sleep after 5 minutes, this is to preserve battery life

Multi-media and special function key:

Light Control:

• Tap FN + Scroll lock to cycle through lighting effects
• FN+1-9: Save user defined backlight zones
• FN+Prtsc: Record self-defined backlighting zones

Record backlight zones:

• Select FN+1-9 to select one group of self-defined backlight.
• Press FN + Print screen to enter backlight zone record mode, when recording starts, the keyboard indicator light will flash.
• Press the key that you want to record as backlit (click light on, click again light off), repeat this step, record the backlit effect what you want.
• After you have finished, press FN+Prtsc to save and exit this mode.
  • You can record 9 different zones this way

Record and use Macros:

• What is a macro? These can be used to map several key presses to a single key combination.
  • e.g. You could set the keyboard to record you typing a command you use regularly and be able to repeat it quickly.

• Step 1: Set keyboard to recording mode - Press FN + Ctrl + Q/W/E, you will then see your selected key (Q,W or E) flash continuously.
• Step 2: Press the keys you wish to record, e.g. Kind Regards, https://, www.thekeycap.com, something you intend to use regularly.
• Step 3: Press FN + Ctrl + Q/W/E to stop recording (The same letter you selected in Step 1), you will then see the light stop flashing.
• Step 4: Try out your new macro, by pressing FN + your chosen letter (Q/W/E).

Lock Windows Key

• Use FN + Win Key to lock/unlock the key to avoid accidentally touching it during gaming.

Restore Factory Settings

• Press FN + Left Ctrl + Esc for 3 seconds.