Description:
The Caddx Turtle V2 camera is a new take on the popular runcam split FPV camera. Just like the split, this is both an HD and FPV camera built into one. Just like the runcam split,, the turtles has a main PCB and a separate camera. But the caddx turtles has the ability to stack the camera and PCB's together to form an integrated camera which is helpful on builds that do not have much space in the stack.
Whats new in V2
- New Turbo Eye lens
- Refined PCB layout with 20x20mm mounting holes - no offset hole!
- Microphone
- Wrapped cable
- Default image setting an bit-rate improvements
New: Convert your Turtle into a GoPro Session style camera using the turtle case
If you would like to have the flexibility to use your turtles camera with a number of gopro session mounts/enclosures on multiple quadcopters be sure to check out the turtle case
Specification
- Image sensor: 1/2.7" CMOS sensor
- Horizontal: 800TVL
- TV system: NTSC/PAL,changeable
- Video Resolution: 1080P@60fps / 720@60fps
- Power Input: DC 4-20V
- FPV FOV : 155
- Recording FOV :170
- Mini Illumination: 0.01lux
- Image Resolution: 2 Megapixels
- Lens: Full Size Turbo Eye Lens
- Working Current: 400mA@5V/190mA@12V (low consumption)
- OSD Menu: Yes (Support Voltage Display)
- Video Files: MOV
- ELectronic shutter : PAL : 1/50-100,000 NTSC : 1/60-100,100
- Real-time Audio Output: Yes
- S/N Ratio: >60dB (AGC OFF)
- Video Output: CVBS
- Max Micro SD Card Supported: 64GB(need Class 6 or above,recommend Class 10/UHS-I/UHS-II)
- Dimension: SD Slot Module 28*29mm / Camera 19*19mm (installed with 20*20mm, expand to 30*30mm )
- Working Temperature: -20~+60
- Net weight: 12g(more or less)
Quick Guide
1. RIGHT BUTTON: Press the RIGHT button for 3s-5s to activate video recording, in the meanwhile the light on the lower right corner will flicker. 2. LEFT BUTTON: Press the LEFT button for 3s-5s to stop video recording. 3. DOWN BUTTON: Press the DOWN button for 3s-5s to switch the resolution, 720P with Blue LED on, 1080P with Red LED on, the default mode is 1080P.
4. MIDDLE BUTTON: The MIDDLE button is the menu button.
Notice: The camera need at least 8G Class 10 SD card. Notes: If the power is cut accidentally when video recording, please power on again, then the camera will automatically restore the memory, and the video records before power cut will be still saved in TF card.
Kit Contents
- 1 x Caddx Turtles Camera
- 1 x 5D-OSD Menu Board
- 1 x 4pin FPV Silicon Cable (extend into a 2pin joint for OSD board and a 3pin joint for FPV)
- 1 x Screw Set
- 1 x Adapter Board
- 1 x Manual
(0 ) Reviews:
No reviews yet. Be the first to review!