AtomRC F405 Navi Fixed Wing Flight Controller

Description:

Fed up with bulky, unreliable controllers that make your drone feel like a lumpy potato in flight? We've been there, cried those tears.

The drone world deserves better! Every FPV pilot needs a flight controller that not only understands their drone's vibe but also enhances it. And wouldn't it be even better if setting it up didn't require a degree in rocket science?

Enter the ATOMRC F405 NAVI Fixed Wing Flight Controller! Designed for the modern FPV pilot, this bad boy packs an unmatched blend of power, intelligence, and...wait for it...sass! Your flights will never be the same, and neither will your bragging rights.

HIGHLIGHTS:

• Super-Brain MCU : STM32F405RGT6, 168MHz with a whopping 1MB Flash.
• Top-Tier Navigation : Compatible with Ardupilot and Inav.
• Sleek & Compact Design : Weighs just 21g! (Your drone's thanking you already.)
• Powerhouse : Support for 2~6S LiPo and includes a 120A Current Sensor.
• Generous Connectivity : With 5x UARTs, 8x PWM outputs, and more!

Specifications

MCU: STM32F405RGT6, 168MHz , 1MB Flash
IMU: BMI270
Baro: SPL06-001
OSD: AT7456E
Blackbox: SD card Slot
5x UARTs,
8x PWM outputs
1x I2C
3x ADC (VBAT, Current, RSSI)
External Type-C port and Buzzer
Inverter on UART2-RX for SBUS

Power
6~30V DC IN (2~6S LiPo)
120A Current Sensor
BEC 5V 5A for servos
9V 2A BEC for VTX and camera
FC Firmware
ArduPilot: ATOMRC F405NAVI
INAV: ATOMRC F405NAVI (INAV 5.0 or newer)

Physical
Dimensions: 30 *50*12mm
Mounting: 30*24mm, 3m
Weight: 21g

Pinout Wiring Diagram

Included

1x F405NAVI
1x external USB(Type-C)/buzzer board + 12cm JST-SH-6P to JST-SH-6P cable
20cm JST-SH-6P cable* for GPS/ DJI air unit
35V 470uf Capacitor

Looking for unparalleled flight control? A touch of elegance? A smidgeon of swagger? The ATOMRC F405 NAVI has you covered. Perfect for those who love to soar, swoop, and occasionally show off!