Description:
The crazybee X flight controller is a feature packed all in one whoop flight controller complete with an integrated receiver, and VTX.
Noticed: IR1 is the signal of RX1 with inverter ,used for SBUS receiver.
RX1 and IR1 couldn't be used at the same time .
CrazybeeX series flight controller is the first 5in1 AIO flight controller which could handle 2s.
It's a better upgrade flight controller for your whoops. We could use this flight controller to building a 1s-2s compatible lightest 65mm/75mm/85mm brushless whoop.
Important: Not compatible with big propeller like 65mm/75mm when use 2s battery .
Recommend max size of propeller is 55mm.
Camera is NOT Included.
Specifications
Flight Controller
- MCU:STM32F411CEU6 (100MHZ, 512K FLASH)
- Sensor: MPU-6000 (SPI Connection)
- Board Size: 28.5 * 28.5mm
- Power Supply: 1S-2S battery input (DC 2.9V-8.7V)
- Built-in 5A(each) Blheli_S 4in1 ESC Dshot600 ready
- Built-in Betaflight OSD(SPI Control)
- Built-in 5.8G VTX
- Built-in SPI Frsky receiver support D8/D16 (
- Built-in 5V 1A BEC
- Built-in voltage detection
- Firmware Target:
- CrazybeeX FR Version: Recommend Betaflight 3.5.7 target CRAZYBBEF4FR
- CrazybeeX FS version: Recommend Betaflight 3.5.7 target CRAZYBBEF4FS
- CrazybeeX PNP version: Recommend Betaflight 3.5.7 target CRAZYBEEF4DX
Onboard 5A 4In1 ESC
- EFM8BB21
- Power Supply: 1-2S LiPo/LiPo HV
- Current: 5A continuous peak 6A (3 seconds)
- Support BLHeliSuite programmable
- Factory Firmware: S_H_50_REV16_7.HEX
- Default Protocol: DSHOT600
CrazybeeX FR V2.2 Version Onboard Frsky SPI Receiver (Optional)
- SPI BUS Receiver Frsky D8/D16 Compatible
- Support for Futaba S-FHSS (Need Betaflight 4.0.5 firmware or latest), Frsky_X_LBT(EU-LBT)
- Channels: 8CH / 16CH
- Failsafe support
- No ground interference ( Transmitter and receiver 1 m from the ground): 100m~200m
CrazybeeX PNP V2.2 Version W/O on Board Receiver (Optional)
Onboard 5.8G 40CH VTX
- Output Power: 25mw~200mw switchable
- Frequency: 40CH
- Input voltage: 3.3V 5.5V
- Current consumption: 300mA(type)
- Frequency: 5.8GHz 5bands 40 channels
- With Race band
- Smartaudio ready
- Default vtx_power is 3
- Should set vtx_low_power_disarm = ON to reduce the high temperature when test on the ground.
Onboard Voltage and Current detector
- Voltage Meter scale "110"
- Amperage Mete scale "1175"
Includes
- 1x HappyModel CrazyBee X V2.2 F4 AIO Whoop Flight Controller (F4 FC, 5A 1-2S 4in1 ESC, 25-200mW VTX)
(0 ) Reviews:
No reviews yet. Be the first to review!