DarwinFPV TinyApe Freestyle Quadcopter Drone

Description:

Introducing the Darwinfpv Tiny Ape Freestyle!

Welcome to a fresh flight perspective, where compact doesn't compromise performance. From the ingenious minds of Darwinfpv comes the Tiny Ape Freestyle - our first-ever 2.5'' drone.

Important

The factory AIO firmware only supports ELRS_V2.0, and can be used with ELRS_V2.0 version TX. The firmware file name of ELRS-V2.0 is BETAFPVF4SX1280

The 4.3 firmware only supports ELRS2.0, if you want to use ELRS3.0, you need to upgrade the AIO firmware to 4.4. However, the 4.4 firmware is a development version, and there will be many unknown errors and risks. If there is a problem with the product after you flash the 4.4 firmware, we will not bear any responsibility. Please upgrade carefully.
(Notice: The updated firmware is named BETAFPVF4SX1280. If you insist on updating, please remember that you cannot use the previous CLI after the update. Please upgrade carefully)

DARWINFPV_ELRS_V2.0_CLI

Features

1. Equipped with the Darwin ELRS2.0 F411 15A Bluejay AIO
2. VTX006 with 25-600mW output power for stable and powerful transmission
3. Lightweight at just 50.3g (sans batteries and paddles)
4. Utilizes the zippy Gemfan 2512 3-blade propeller
5. Incorporates the powerful 1103 8000KV Brushless Motor
6. Built with the ultra-clear RunCam Nano 4 camera

You're a pilot who refuses to be boxed in, so why should your drone be any different? Swoop, swoosh and swirl through the skies with the Tiny Ape Freestyle, your new partner in all your aerial endeavours.

Attention-grabbing ? No question about it! If you're scouring the internet for the "best FPV drones," "lightweight freestyle drones," or "2.5-inch drones," you'll find this marvel ticks all those boxes and more. The Tiny Ape Freestyle isn't just a drone - it's a declaration of freedom!

Interest piqued ? You bet! This tiny beast packs a lot under its hood. The F411 1-3S 15A FC - with an integrated ELRS 2.4G receiver - and the VTX006, capable of 25-600mW output power, make it a technological tour de force.

Desire ignited ? Absolutely! Who can resist the siren call of the RunCam Nano 4's 1/3'' CMOS sensor and 800TVL resolution? It's time to let those low-light night flights come alive with vivid realism.

Action required ? You've got it! Grab your 2S 380-450mah battery, and prepare for up to 5 minutes of high-speed, adrenaline-fuelled action.

Just remember, with great power comes... greater responsibility! The 4.3 firmware only supports ELRS2.0. If you're daring enough to upgrade to ELRS3.0 and flash the 4.4 firmware, tread carefully - unknown errors and risks may lurk in the shadows. But if you're a risk-taker, remember: we admire your spirit, but we can't bear any responsibility!

Also, a little birdie (okay, it was the red light on the VTX) told us that you can choose your output power according to your FPV needs. From 25mW for leisurely exploration to 600mW for those "Need for Speed" moments, the Tiny Ape Freestyle has got you covered.

So, are you ready to join the ranks of the daring, the adventurous, the freestylers? Leap into the skies with the Darwinfpv Tiny Ape Freestyle today! Remember, we don't just fly - we soar!

Specification

Weight : 50.3g (without batteries and paddles)

Propeller : Gemfan 2512 3-blade propeller

FC&ESC F411 1-3S 15A FC(Built-in ELRS 2.4G receiver)

Built-in Receiver Protocol : SPI ELRS 2.4G

Motor: 1103 8000KV Brushless Motor

Camera : RunCam Nano 4

VTX :25-600mW VTX

AIO Firmware : betaflight_4.3.0_BETAFPVF4SX1280

ESC Firmware: Bluejay_S_H_50_48_v0.14

Recommended Battery: 2S 380-450mah

Included

• 1x DarwinFPV Tiny Ape Freestyle Drone
• 1x Accessories Kit