Description:
Meet the GOKU GM10 V3 GPS, the latest marvel from FLYWOO featuring the cutting-edge M10050 GNSS chip. This version trumps its predecessor, the GM8 V2, with pinpoint accuracy and lightning-fast satellite acquisition.
Note: The chip of GOKU GM10 V3 GPS is M1005. Only BF4.3x version firmware can use Ublox protocol.
BETAFLIGHTUse firmware above 4.3.0
INAVUse the latest 6.0.0 configurator, the latest firmware above 5.0.0
Specifications
- Brand: FLYWOO
- Model: GM10 PRO V3 GPS w/ Compass
- Dimensions: 25mm x 25mm x 6mm
- Weight: 7.3g
- Connector: 1.00mm spacing between the 6-pin patch seat
Key Features
- Advanced GPS Module with Tri-module Compass
- Integrated electronic compass IC QMC5883L
- 1.0mm spacing between the 6-pin patch seat
Electrical Characteristics
- Chipset: M10050 (Tenth Generation Chip)
- Receiving Format: GPS, GLONASS, Galileo, BeiDou, QZSS, and SBAS
- Default Protocol: GPS, Galileo, BeiDou
- Frequency: GPS L1, GLONASS L1, BeiDou B1, SBAS L1, Galileo E1
- Channels: 72 Searching Channels
Sensitivity
- Tracking: -162dBm
- Reacquisition: -160dBm
Data and Update Rate
- Support Rate: 4800bps to 921600bps, Default 115200bps
- Data Level: TTL or RS-232, Default TTL level
- Data Protocol: BF4.3.X (UBLOX) / BF4.2.X (NMEA)
- Output Frequency: 1Hz-10Hz, Default 10Hz
Operational Limits
- Altitude: 50,000m Max
- Velocity: 500m/s Max
- Acceleration: Less than 4g
Power Consumption
- VCC: DC Voltage: 5V
- Operating Temp: -40C to +85C
- Storage Temp: -40C to +105C
Indicator
- PPS LED: Yellow (not bright when GPS not fixed, flashing when fixed)
- Module's Pins: TX, RX, GND, 5V, SCL, SDA
What's in the Box
- 1x GM10 PRO V3 GPS w/ Compass
- 1x 150mm Cable
- 1x Copper Foil
Note: Accessories may vary based on supply.
(0 ) Reviews:
No reviews yet. Be the first to review!