Description:
PLEASE NOTE: It is possible for the Mobula6 to lose bind and betaflight config if the battery is allowed to run too low - however this can be easily resolved to get back in the air again. Please see here for more info.
This is a 65mm brushless whoop from happymodel that weighs in at just 20g. It features the crazybee F4 Lite flight controller (4x5A ESC) that includes either a built in FRsky or Flysky receiver. The camera is the runcam nano 3, which is one of the best tiny FPV cameras you can get at this price point. If you are looking for alot of fun in a tiny package this is the brushless whoop for you.
Key Features
- Crazybee F4 Lite Flight Controller with MPU6000 (1S lipo support)
- The lightest tiny whoop at 20g
- Strong injection moulded canopy
- Runcam Nano 3 FPV camera
- Includes batteries and charger
Specification
- Brand Name: Happymodel
- Model: Mobula6
- Item Name: 65mm Crazybee F4 Lite 1S Brushless Whoop FPV Racing Drone BNF
- Optional Version: Frsky Receiver ( Compatible with ACCST D8/D16, Recommend D8 mode)
Flysky Receiver ( Compatible with AFHDS and AFHDS-2A Flysky transmitter)
- Drone Wheelbase: 65mm
- Size: 80x80x37mm
- Weight: 20g
Detailed Component Specifications
Crazyb
Crazybee F4 LiteFlight Controller Built-in ESC & Receiver & VTX |
Frsky SPI RX version) CRAZYBEE F4 Lite Frsky version Firmware target: CrazybeeF4FR (Flysky SPI RX version) CRAZYBEE F4 Lite Flysky version Firmware target: CrazybeeF4FS MCU:STM32F411CEU6 (100MHZ, 512K FLASH) Sensor: MPU-6000(SPI connection) Board size: 28.5 * 28.5MM Power supply: 1S battery input (DC 2.9V-4.35V) Built-in 5A(each) Blheli_S 4in1 ESC Dshot600 ready Built-in Betaflight OSD(SPI Control) Built-in 5.8G VTX Built-in SPI Frsky/Flysky receiver Built-in 5V 1A BEC Built-in voltage detection |
| Onboard Frsky Receiver Version |
SPI BUS receiver Frsky D8 compatible Compatible Non EU transmitter D8 model Channels: 8ch Failsafe support No ground interference ( Transmitter and receiver 1 m from the ground): 100m~200m |
| Onboard Flysky Receiver Version |
SPI BUS receiver Protocol: AFHDS and AFHDS-2A Switchable Channels: 8ch(AFHDS) or 14ch(AFHDS-2A) No ground interference ( Transmitter and receiver 1 m from the ground): 100~200m Failsafe support |
| Onboard 5A BLheli_S 4in1 ESC |
MCU upgraded to EFM8BB21 Power supply: 1S LiPo/LiPo HV Current: 5A continuous peak 6A (3 seconds) Support BLHeliSuite programmable Factory firmware: O_H_5_REV16_7.HEX Default protocol: DSHOT600 |
| SE0802 19000KV / 25000KV Motor |
Model: SE0802 KV: 19000KV / 25000KV Motor Configu-ration:9N12P Stator Diamter:8mm Stator Length:2mm Shaft Diameter:1mm Motor Dimension(Dia.*Len):10.5mm*14.9mm Weight(g):1.9g No.of Cells(Lipo):1S only |
| Gemfan 1219 3-Blade Propeller |
Brand Name: Gemfan Center Thickness:5mm Prop Disk Diameter:31mm Center Hole Inner diameter:1.0mm Quantity: 4 CW & 4 CCW Weight:0.28g |
| Onboard 5.8G 40CH 25mW VTX |
Output power: 25mw Frequency: 40CH Input voltage: 3.3V 5.5V Current consumption: 300mA(type) Frequency: 5.8GHz 5bands 40 channels With Race band Smartaudio ready |
| Runcam Nano 3 FPV Camera |
Brand Name: Runcam Model: Nano 3 Item Name: 1/3 CMOS 800TVL Camera Electronic Shutter Speed: Auto Auto Gain Control (AGC): Auto Min. Illumination: [email protected] D-WDR: Auto Day/Night: Color Power:DC 3-5.5V Current: 110mA@5V [email protected] Housing Material: ABS Net Weight: 1.2g Dimensions: L14mm*W14mm*H9mm |
| Lipo Battery ( Included) |
Continuous Discharge Rate: 30C Size: 57mmx12mmx7mm Weight: 8g Connector: PH2.0 Quantity: 4 PCS |
|
|
Included
- 1x Mobula6 1S FPV Racing Drone
4x 1S 300mAh 30C Lipo Battery
1x 1S Lipo/LIHV USB Charger
1x Propeller disassemble Tool
(0 ) Reviews:
No reviews yet. Be the first to review!