Description:
Are you in need of a long-range HD video transmission system for your UAV? Look no further than the Herelink HD Digital Video Transmission System!
Brought to you by the team behind Pixhawk and The Cube GPS system, the Herelink system is an all-in-one solution that integrates a data link unit, remote control link, and video display unit into a single device, making it both compact and feature rich. The Air Unit has a signal transmission range of up to 20km, minimum latency of 110ms, and supports 720p 30fps or 1080p 30/60fps video formats. The Controller is a 2.4GHz radio controller with a built-in screen that allows users to get long-range HD video, telemetry, and control link up to 20km (12km in CE). Both the Air Unit and the Controller are equipped with powerful Pinecone S1 processors and updated with features like a brighter screen, Ethernet port, and SD card slot.
Imagine the versatility and convenience of having all of these features in a single, easy-to-use system. With the Herelink HD Digital Video Transmission System, you'll be able to get the high-quality video and control link you need for your UAV, all while taking advantage of the latest technology.
Don't miss out on the opportunity to upgrade your UAV with the Herelink system. Purchase it today and take your aerial capabilities to new heights!
Features
- Data Link, Remote Control Link, and Video Display
- PineSync Technology based on S1 Processor
- 720p@30fps or 1080p@30/60fps Resolution
- 1000 Nit Screen Brightness
- CubePilot Hex Technology
- 2.4GHz Frequency Band
- 4W Power Consumption
- MMCX antenna jacks
- 110ms Video Delay
- 7-12V Power Input
- Indicator lights
- A7 + DSP SDR
- ETH Interface
- Micro USB
- SD Slot
V1.1 CHANGELOG
- Controller Screen brightness updated to 10000 nit.
- Ethernet port added to Air Unit
- SD card slot added to Air Unit
Advantages
- Digital Image Transmission Remote Controller integrated: Data Link, Remote Control Link, Video Link integrated all-in-one
- The Remote Controller is equipped with a High-Definition screen, which is easy to use and highly integrated.
- HD video, low latency, long distance: video transmission can reach 1080p@60fps
- Data delay <110ms, transmission distance 20KM (ground-to-air, no occlusion without interference)
- Dual image input, Real-Time switching: Dual HDMI video input, users can switch video source through Remote Controller (display one video source at the same time)
- Open system, customizable development: The Remote Controller has built-in Android system, which will provide API for users to develop and use, and get the most out of the system.
Specifications
- Size: 217106.531mm (not include external antennas and joy-sticks)
- Transmission Distance: FCC 20km | CE / SRRC / MIC 12km
- Memory: Air unit LPDDR3 1GB | Controller LPDDR3 2GB
- SOC: 4 *Cortex A53, 2.2GHz / 4 * Cortex A53, 1.4GHz
- Storage: Air unit EMMC: 4GB|Controller EMMC8G
- Image resolution: 720p-30fps | 1080p-30/60fps
- Receive sensitivity: -99dBm@20MHz BW
- Processor: SoC - Pinecone S1
- Frequency Band: 2.4GHz ISM
- GPU: 4 Core, Mali-T860
- Video Delay: 110 ms
- SDR: A7 + DSP
- Recovery: < 1s
- Weight: 536g
HERELINK CONTROLLER 1.1
- Power Consumption: The average power consumption does not exceed 4W (only picture transmission work, medium screen brightness, WiFi off, GPS off)
- Remote: Hall effect gimbals with removable sticks x 2, scroll wheel 1, bottom button 6 with backlight, top button 1 (right)
- External Antenna: Directional antenna (5dBi) *1 detachable omnidirectional antenna(2dBi) *1 detachable
- Build-in Antenna: built-in wifi antenna, built-in GPS antenna, external GPS antenna interface
- Wireless Communication: Bluetooth / WIFI / GPS / 2.4G map transmission ground
- Screen: 5.46 inch1080P16 million colors, capacitive touch screen
- Interface: MicroUSB 1, Micro SD 1 (supports maximum 64GB)
- Charging: Support micro USB port 5v 2A current charging
- Indicator light: tricolor LED *2 (Upright and left corner)
- Audio: Built-in speaker 1, built-in microphone 2
- Power: Build-in 4950 mAh Lipo Battery
- Screen brightness: 1000nit
HERELINK AIR UNIT 1.1
- Micro USB: Used for debugging and upgrading, support OTG mode**no need for external power for USB device**
- Power Input: Recommended supply voltage ~7V: minimum 6V, maximum 12V, and avoid sharing BEC with servos
- MMCX antenna jack 1, 2: Used for signal transmission and ground communication
- ETH Interfaceonly supported by Air unit 1.1: Network protocol device access
- Indicator light 12: Used to indicate state for pairing and video transmission
- Power Consumption: The average power consumption does not exceed 4W
- Manufacturer: HEXAERO PTE LTD. / HEX TECHNOLOGY LIMITED
- SD Slotonly supported by Air unit 1.1: For future usage
- Micro HDMI 1: Camera video signal input (Recommend)
- S.bus Interface: Dual RCout, S.bus1, and S.bus2
- Micro HDMI 2: Camera video signal input
- Button: Used for pairing and state reset
- Signal Bandwidth 20MHz / 10MHz
- Model: Herelink Air Unit 1.1
- UART Interface: 3.3V UART
- FCC ID: 2A596-HX406210
- Size: 78.53015mm
- Voltage Rating: 7-12V
- IC: 28413-HX406210
- SKU: HX4-06210
- Weight: 98g
Links
- Quick Start Guide
- User Guides
- Overview
Includes
HERELINK CONTROLLER 1.1
- 1x Herelink Controller Unit V1.1
- 1x Herelink Omni-directional Antenna
- 1x Herelink Directional Antenna
- 2x Herelink Controller Joystick
- 1x Herelink Set up tips card
HERELINK AIR UNIT 1.1
- 1x Herelink HD Air Unit V1.1
- 1x Herelink Silicone Ring Set
- 2x Herelink Taoglas Antenna
- 1x Herelink Set up tips card
- 1x Herelink Mounting Plate
- 1x Herelink HDMI Cable
- 1x Herelink Screw Set
- 1x Herelink Cable Set
- 1x Herelink Fan
(0 ) Reviews:
No reviews yet. Be the first to review!