Description:
You, the daredevil FPV pilot, deserve more than just a GPS module that limps through the skies like an injured bird. You want precision, flexibility, and a dash of stylebecause hey, even if you're flying a drone, you want to look good doing it.
Enter the pitfall of many a GPS modulelaggy response, low accuracy, and compatibility issues. Did we mention that it can be as confusing as a map drawn by a toddler? Ah, the horror!
Don't fret! With the Holybro M10 Standard GPS Module, you'll be flying through the skies with the precision of a hawk and the grace of a ballerinaseriously, it's that good.
Key Features
- Four-Way Love Affair: With multi-constellation GNSS, track GPS, Galileo, GLONASS, and BeiDouall at the same time! It's like having a buffet of satellites.
- IST8310 Compass: Navigate like Captain Jack Sparrow but without the rum. Always know where you're going.
- Tricolour LED & Buzzer: No need to ask if it's workingthe LED and buzzer will holler back at you.
- High-Gain Antenna: A 25 x 25 x 4 mm patch antenna for stellar performance. With this, you could find a needle in a haystack.
- Up-to-Date Firmware Support: From PX4 1.14 to Betaflight 4.3.0, we've got you covered. Just remember to keep an eye on the latest updates.
Specifications
| |
Holybro M10 GPS |
Holybro M9N GPS |
| GNSS Receiver |
Ublox M10 |
Ublox M9N |
| Number of Concurrent GNSS |
Up to 4 GNSS |
Up to 4 GNSS |
| BeiDou |
BeiDou |
| Galileo |
Galileo |
| GLONASS |
GLONASS |
| GPS |
GPS |
| QZSS |
QZSS |
| Frequency Band |
GPS L1 |
GPS L1 |
| Galileo E1 |
Galileo E1 |
| GLONASS L1 |
GLONASS L1 |
| BeiDou B1 |
BeiDou B1 |
| SBAS L1 |
SBAS L1 |
| QZSS L1 |
QZSS L1 |
| Compass |
IST8310 |
IST8310 |
| Output Protocol |
UBX (U-blox) |
UBX (U-blox) |
| NMEA |
NMEA |
| Accuracy |
2.0m CEP |
1.5m CEP |
| Nav. Update Rate |
Up to 25 Hz (single GNSS), |
Up to 25 Hz (4 concerrent GNSS) |
| Up to 10 Hz (4 concurrent GNSS) |
| GNSS Augmentation System |
EGNOS, GAGAN, MSAS and WAAS |
EGNOS, GAGAN, MSAS and WAAS |
| QZSS: L1S |
QZSS: L1S |
| Default Baud Rate |
115200 |
115200 |
| Input Voltage |
4.7-5.2V |
4.7-5.2V |
| Port Type |
JST-GH-10P |
JST-GH-10P |
| Antenna |
25 x 25 x 4 mm ceramic patch antenna |
25 x 25 x 4 mm ceramic patch antenna |
| Power consumption |
Less than 200mA @ 5V |
Less than 200mA @ 5V |
| Operating Temperature |
-40~80C |
-40~80C |
| Dimension |
50 x14.4 mm |
50 x14.4 mm |
| Weight |
32g |
32g |
| Cable Length |
26cm (42cm cable purchase separately) |
26cm (42cm cable purchase separately) |
| Other |
Tri-color LED |
Tri-color LED |
| Onboard Buzzer |
Onboard Buzzer |
| Safety Switch |
Safety Switch |
| LNA MAX2659ELT+ RF Amplifier |
LNA MAX2659ELT+ RF Amplifier |
| Rechargeable Farah capacitance |
Rechargeable Farah capacitance |
| Low noise 3.3V regulator |
Low noise 3.3V regulator |
What's in the Box
- 1x M10 GPS Module
- 1x Fixed Carbon Fiber GPS mount
Compatibility
Perfect for the Pixhawk Standard Flight Controller 10pin "GPS Module" or "GPS1" input port.
(0 ) Reviews:
No reviews yet. Be the first to review!