ToolkitRC MC8 Battery Multi Checker

Description:

Please note that for Toolkit RC chargers, a voltage calibration may be required before use or after a firmware update. This calibration ensures accurate readings and optimal performance. For detailed instructions on how to perform a voltage calibration, please refer to the manual included with your charger. You can also find more information on this process at the following link: https://help.unmannedtech.co.uk/portal/en-gb/kb/articles/how-to-calibrate-toolkit-rc-voltage.

MC8 Manual V1.2

Key Features

• Large colour screen
• Battery status display - cell voltage checker, supports 1S to 8S batteries
• Receiver signal readout: PWM, PPM & SBUS gives you the value of each channel
• PWM, PPM, SBUS signal generator output for driving servos, ESCs
• High precision LiPo battery cell balancer 0.005V / 60mA
• USB-C 20W fast charging for phones & tablets etc (supported protocols PD3.0, QC3.0, AFC, SCP, FCP etc)
• USB-A 5V 1A output
• Intuitive control

Specifications

• LCD: 2" IPS 320x240
• Dimensions: 68x50x15mm
• Weight: 50g

Checker

• Main Input port: XT60 7.0-35.0V
• Balance input: 0.5V-5.0V Lixx 2-8S
• Signal port input: <6.0V
• Balance current: MAX 60mA @2-8S
• Balance accuracy: <0.005V @ 4.2V
• USB-A output: [email protected] firmware upgrade
• USB-C output: 5.0V-12.0V @MAX 20W
• USB-C protocol: PD3.0 QC3.0 AFC SCP FCP

Measurer

• PWM: 880-2200us @20-400Hz
• PPM: 880-2200us*8CH @20-50Hz
• SBUS: 880-2200us*16CH @20-100Hz

Output

• PWM: 1000-2000us @20-1000Hz
• PPM: 880-2200us*8CH @20-50Hz
• SBUS: 880-2200us*16CH @20-100Hz

Included

• 1x Toolkit RC MC 8 Multi-Functional 2-8S Battery Checker